Perfect working conditions with industrial air curtain
The IndAC model makes entrances in industrial buildings accessible for transport and prevents draught problems in the building. To provide a complete screening of the huge doorways, the air curtain must discharge large air volumes. Therefore, the discharge pattern in the IndAC model has been optimized. Using the patented, combined rectifier, the air is blown out through the curved discharge grille with as little as possible resistance. The air stream reaches the floor in a straight, vertical line, so that a minimum of energy is consumed. The homogeneous discharge pattern provides for optimum heating of cold outdoor air, thus eliminating draught in the building. Various mounting positions The air curtain can be mounted in different ways, so that the curved discharge grille will always be as close as possible to the door, which screens off the doorway completely. The modular design makes that multiple air curtains can be easily linked next to or above one another, so they can cover each and every door height or width. Control options - Basic: a 5-speed switch controls the air flow rate. A door contact switch or room thermostat can be connected.
- Plus: a 5-speed switch controls the air flow rate. A room thermostat controls the speed when the door is closed. The door switch controls the speed when the door is open. With a closed door, the room thermostat will not switch the air curtain off until the desired room temperature has been reached. This control is also suitable for connecting a Building Management System (BMS).
- Auto: the unit is controlled by a pre-programmed control unit. The air- and waterside controls ensure that the air flow rate and the discharge air temperature are automatically adjusted to different conditions using several sensors near the doorway.
| Specifications | | | Capacities | S, M and L* | | Door heigths | 300 - 600 cm | | Unit widths | 150 - 200 cm | | Heating source | Water and electric | | Control unit | Basic, Plus and Automatic | | Models | Free-hanging in various (horizontal and vertical) mounting positions | | Control unit | Basic, Plus or Auto | | Standard colours | Blue and metallic | Accessories
| Suspension brackets, control unit, base plate, door contact switch, room themostat | * Type L is available from mid-2007.Benefits - Comfortable working conditions
- Low energy consumption
- No more ventilation problems
- Free access
- Combinable with overhead door
- Easy to operate
- Flexible suspension system
- Easy to maintan
|